Thermal Spraying Wire

Thermal spraying wire in a wide range of alloys for high-temperature corrosion protection, bonding layers, build-up coating and sealing.

Spray wire alloys

The  program of tspray wire includes the following types of alloys:

FeCrAl and FeCrAl alloys

NiCr and NiCrFe alloys

NiAl alloys

NiFe alloys

CuNi alloys

List of alloys including application areas

Sizes

Standard sizes are 1.20, 1.60 and 2.00 mm (0.0472, 0.0693 and 0.0787 inch). Other sizes can be offered on request. The standard delivery form is tight wound on SD 300K spools.

Typical applications

thermal spraying wire is used in a variety of applications, such as:

High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres

Coatings to resist heat and prevent scaling of conventional low alloy steels

Bond coats for improving the adhesion of top coatings

Coatings on moulds in the glass industry

Safety

Personnel working with thermal spraying should be aware of the hazards connected to the process. They should be familiar with the use of protection equipment for eyes, skin, hearing, respiratory system etc. Personnel should be familiar with safety regulations regarding the complete process, including spraying and the spray equipment used.

This product contains elements, which in certain combinations may be dangerous to your health. We provide Material Safety Data Sheets (MSDS) for this product, which should be read and understood before using the material.