Skip to content

Mosi2 fiber heating module

MoSi2 Ceramic fiber heating modules consisting of vacuum-formed ceramic fiber with an integral molybdenum disilicide MoSi2 heating element for up to 1750°C element temperature.

MoSi2 heating modules are intended for use in laboratory or production furnaces/heaters whereever concentrated heat is needed. They also provide major energy savings in several applications. The flexibility of the heating modules allows for different tests and processes to take place in the same furnace set-up.

Advantages compared to conventional furnaces

Fast and easy to install and replace

Quick temperature ramping

Accurate temperature profiles

Very high power concentration

Long service life

Geometries

MoSi2 heating modules are available in a variety of geometries and standard sizes. Tailor-made modules can be supplied to optimize the design and function of the particular application.

Muffles

Cylinders

Half cylinders

Radiating panels

High-power reflectors

Typical application areas

Laboratory furnaces

Dental furnaces

Glass manufacturing

Semiconductor manufacturing

Related guides

Why specify with HeatingDriver

HeatingDriver supplies ceramic fiber blanket, board, paper, module and textile for high-temperature insulation, with nearly 20 years of export experience and custom cuts. Browse our heating elements and furnace parts.

What temperature can ceramic fiber insulation withstand?

Ceramic fiber blanket and board are commonly used for continuous service up to about 1000-1260 degC depending on grade, with special high-purity grades rated higher. Always match the product grade to your furnace operating temperature.

What is the difference between ceramic fiber blanket, board and module?

Blanket is flexible and used for lining irregular spaces; board is rigid and good for flat hot-face or backup insulation; module is a pre-compressed block for fast furnace wall installation. HeatingDriver supplies all three plus paper and textile.

Is ceramic fiber safe to handle and install?

Ceramic fiber products should be handled with basic PPE (gloves, dust mask, eye protection) to avoid skin and respiratory irritation from fibers. Cut with a sharp knife on a clean surface and avoid generating dust.

Can ceramic fiber be custom cut to size?

Yes. Blanket, board, paper and modules can be supplied in custom dimensions and shapes, and modules are built to furnace wall thickness. HeatingDriver provides custom cuts for specific furnace designs.



    Back To Top
    Share
    Your Cart

    Your cart is empty.